Avidyne EX600 User Manual

Reference
Avidyne EX500/EX600 MFD -156- 600-00078-001 Rev 05
11.15 Broadcast Datalink Messages
Table 11.16 Broadcast Datalink Messages
Datalink Messages
& Colors
Meaning Recommended
Pilot Action
Broadcast Receiver
Not Communicating
EX500/EX600 has
received no data from
the broadcast receiver
for 10 minutes
Have the wiring from
the broadcast receiver
to the EX500 inspected.
Broadcast Antenna
is Disconnected
The Broadcast Datalink
antenna or cable is not
properly connected to
the receiver.
Have the Broadcast
antenna connection
inspected
Broadcast Receiver
is Operating
Normally
The Broadcast receiver
is operating in a normal
state from a recoverable
fault that was previously
acknowledged.
Acknowledge
Broadcast Data not
yet received
The
EX500/EX600 did
not receive Broadcast
weather data within the
first 10 minutes after
power-on.
Monitor Broadcast
system during flight,
have system inspected
if performance does not
improve.
Broadcast RADAR
not received
The
EX500/EX600 did
not receive RADAR data
within the first 15
minutes of operation
after power-on.
Monitor Broadcast
system during flight,
have system inspected
if performance does not
improve.
Broadcast METARs
not received
The EX500/EX600 did
not receive METAR data
within the first 15
minutes of operation
after power-on.
Monitor Broadcast
system during flight,
have system inspected
if performance does not
improve.
Broadcast Storm
Cells not yet
received
The EX500/EX600 did
not receive Storm Cell
data within the first 15
minutes after power-on.
Monitor Broadcast
system during flight,
have system inspected
if performance does not
improve.

Avidyne EX600 Specifications

General

Brand	Avidyne
Model	EX600
Category	Monitor
Language	English