Balluff BTL PF 400 Series - IO-Link interface

14 english
7
IO-Link interface
The IO-Link device supports the functions listed in this
chapter.
For further information, see document IO-Link
configuration under www.balluff.com on the
product page.
Primary functions
– Identification
– Device Discovery
– Magnet Mode
– Process Data Variable Mapping (BTL6-compatible)
– Output Characteristic and Zero Point Offset) (BTL6-
compatible versions)
– Measurement Profiles
Secondary functions
– Signal Delay
– Basic Statistics
– Logic Blocks
– Operating Hours Counter
– Boot Cycle Counter
– Extreme Environment Status
– Internal Temperature
– Humidity
– Storage Usage Monitoring
System functions
– Device Status and Detailed Device Status
– Diagnosis Suppression
– Reset Commands
– Variant Configuration
– LED Meaning and Configuration
– Process Data Info and Configuration
– Profile Characteristic
– Parameter Manager
BTL PF _ 400- _ _ _ _ -C12NL _ _ -0-000S04
Magnetostrictive Linear Position Sensor – Profile Style