• Reduced Resolution (Floating Blanking) (
Reduced
Resolution/Floating Blanking
on page 35)
• Trip or Latch Output (
Selectable Trip/Latch Outputs
on page 50)
• External Device Monitoring (EDM) (
External Device
Monitoring
on page 40)
• Auxiliary Output (
Auxiliary (Aux.) Output
on page
41)
• Scan Code (
System Configuration Settings
on page
48)
• Fixed Blanking (
Fixed Blanking
on page 35)
• Inverted Display (
Inverted Display
on page 50)
• Cascading (available on SLPC.. models)
(
Cascadeable EZ-SCREEN Safety Light Screen
on
page 62)
These functions are configured via DIP switches (behind the access door on the front of each sensor) and/or the sensor
wiring configuration. The sensing resolution is determined by the emitter and receiver model.
EZ-SCREEN
®
14/30 mm Safety Light Screen
www.bannerengineering.com - Tel: + 1 888 373 6767 11
To Next Page
Loading...
