Banner EZ-SCREEN - Cascadeable Emitter and Receiver Models with 14 MM Resolution; Cascadeable Emitter and Receiver Models with 30 MM Resolution

Available single-ended, double-ended, and splitter cables are listed in Cordsets on page 14. Cable lengths are limited – for
both the power cables and the interconnect cables; see Determining Interconnect Cable Lengths on page 65 for more
information.
Important: If a cascaded system requires the Remote Test function (see Remote Test Input on page 42),
then all emitters in the cascade must be 5-pin emitter models (model SLSCE..-..Q5); the interconnection
between these cascaded emitters can only be accomplished using 5-pin DEE2R-5..D cables.
8.2.1 Cascadeable Emitter and Receiver Models with 14 mm
Resolution
The 14 mm Resolution Cascadeable Models have a 0.1 m to 6 m (4 in to 20 ft) range. Only standard 8-pin QD models are
listed; 8-pin emitters/receivers feature “swapable” wiring. see Initial Electrical Connections on page 31 and Sensor
"Swapability" on page 42.
For cabling options, see Cordsets on page 14.
Machine interface/power cables (one per end sensor, two per pair): Use QDE-..D cables.
Sensor interconnect cables (one per cascaded sensor, two per pair): Use DEE2R-..D cables.
Defined Area Height
11
Emitter (8-pin) Receiver Emitter/Receiver Pair Number of Beams
Response Time (Tr)
(ms)
300 mm (11.8 in) SLSCE14-300Q8 SLSCR14-300Q8 SLSCP14-300Q88 40 15
450 mm (17.7 in) SLSCE14-450Q8 SLSCR14-450Q8 SLSCP14-450Q88 60 19
600 mm (23.6 in) SLSCE14-600Q8 SLSCR14-600Q8 SLSCP14-600Q88 80 23
750 mm (29.5 in) SLSCE14-750Q8 SLSCR14-750Q8 SLSCP14-750Q88 100 27
900 mm (35.4 in) SLSCE14-900Q8 SLSCR14-900Q8 SLSCP14-900Q88 120 32
1050 mm (41.3 in) SLSCE14-1050Q8 SLSCR14-1050Q8 SLSCP14-1050Q88 140 36
1200 mm (47.2 in) SLSCE14-1200Q8 SLSCR14-1200Q8 SLSCP14-1200Q88 160 40
1350 mm (53.1 in) SLSCE14-1350Q8 SLSCR14-1350Q8 SLSCP14-1350Q88 180 43
1500 mm (59 in) SLSCE14-1500Q8 SLSCR14-1500Q8 SLSCP14-1500Q88 200 48
1650 mm (65 in) SLSCE14-1650Q8 SLSCR14-1650Q8 SLSCP14-1650Q88 220 52
1800 mm (70.9 in) SLSCE14-1800Q8 SLSCR14-1800Q8 SLSCP14-1800Q88 240 56
Other available models:
To order the 5-pin emitters with Test input models, replace the suffix “Q8” with “Q5”, (e.g., SLSCE14-300Q5), and for the
pair replace “Q88” with “Q85” (e.g., SLSCP14-300Q85). If a 5-pin emitter is used in the
first (“master”) position in a
cascaded system, then 5-pin emitters must be used in all other positions in that cascade.
To order the pigtail QD (8-pin models only), replace the “Q” in the model number with “P” (e.g., SLSCE14-300P8).
To order the ESD-safe models, add “N” to the model number, prior to the QD option designation (e.g., SLSCE14-300NQ8).
ESD-safe models are not available with the pigtail QD option.
Optional housing finishes include the following. Add the model code before the QD designation in the model number:
• add “A” for a clear (brushed) anodized aluminum finish, black endcaps (e.g., SLSCE14-300AQ8),
• add “S” for a nickel-plated (“silver”) finish, black endcaps (e.g., SLSCE14-300SQ8),
• add “B” for a black painted
finish, black endcaps (e.g., SLSCE14-300BQ8),
• add “W” for a white painted finish, black endcaps (e.g., SLSCE14-300WQ8), or
• add “SO” for a “safety orange” painted finish, black endcaps (e.g., SLSCE14-300SOQ8).
8.2.2 Cascadeable Emitter and Receiver Models with 30 mm
Resolution
For cabling options, see Cordsets on page 14. Only standard 8-pin QD models are listed; 8-pin emitters/receivers feature
“swapable” wiring; see
Initial Electrical Connections on page 31 and Sensor "Swapability" on page 42.
11
150 mm SLSC.. systems not available.
EZ-SCREEN
®
14/30 mm Safety Light Screen
www.bannerengineering.com - Tel: + 1 888 373 6767 63