Banner EZ-SCREEN - Page 94

Models Construction Connector/LED Function/Inputs
M18RGX8PQ8
26
Nickel-plated brass housing, M18x1 thread;
thermoplastic lens
Fully encapsulated IP67
8-pin Euro-style Integral QD
Red/Green indication follows OSSD output
of the EZ-SCREEN receiver
ON Red:—Power ON Beam Blocked or
Lockout
ON Green:—Power ON Beam Clear
PNP (Sourcing)
T18RGX8PQ8
Thermoplastic polyester housing, thermoplastic lens
Fully encapsulated IP67
T30RGX8PQ8
K30LRGX8PQ8
Polycarbonate housing, 30 mm thermoplastic dome,
22 mm base mount
Fully encapsulated, IP67
K50LRGX8PQ8
Polycarbonate housing, 50 mm thermoplastic dome,
30 mm base mount
Fully encapsulated, IP67
K80LRGX8PQ8
Polycarbonate housing, 50 mm thermoplastic dome,
flat or DIN mount
Encapsulated electronics, IP67
26
Available in a kit that includes one M18 EZ-LIGHT, one SMB18A mounting bracket, and hardware for mounting to the side channel of an EZ-
SCREEN housing (kit model number EZA-M18RGX8PQ8).
EZ-SCREEN
®
14/30 mm Safety Light Screen
94 www.bannerengineering.com - Tel: + 1 888 373 6767