12 P/N 133487
Banner Engineering Corp. • Minneapolis, U.S.A.
www.bannerengineering.com • Tel: 763.544.3164
SC22-3 Safety Controller
Instruction Manual
Components and Specifications
2. Components and Specifications
Model Description
SC22-3-S Screw terminals, XM card
SC22-3-C Clamp terminals, XM card
SC22-3-SU1
Screw terminals, XM card, XM card programming
tool and USB A/B cable included
SC22-3-CU1
Clamp terminals, XM card, XM card programming
tool and USB A/B cable included
Model Description
SC-XM1 External memory card (XM card)
SC-XM1-5 Bulk pack of 5 XM memory cards
SC-XMP USB programming tool for XM card
SC-TS1
Screw terminal blocks
(1 set for 1 Safety Controller)
SC-TC1
Cage clamp terminal blocks
(1 set for 1 Safety Controller)
SC-USB1 USB A/B cable
134534 CD including PCI program and instruction manual
Replacement Parts/Accessories
2.1 Models
Safety Controller Starter Kit Models
Kits include SC22-3 Safety Controller, a set of plug-on terminal
blocks (screw or cage-clamp type, depending on model), USB
A/B cable (for direct connection between PC and Controller,
included with some kits), external non-volatile memory card (XM
card, with write-on label on reverse side), XM card programming
tool (included with some models), CD (includes software
interface, online manual and configuration tutorials), and quick
start guide.
To Next Page
Loading...
Need help?
General
