Barco ClickShare CSE-200+ Installation Manual

R5900087 /04 ClickShare CSE-200+24
1.1 Documentation
About the documentation
This installation guide explains how to install your CSE-200+ in a meeting room, It explains also how to make
everything operational. It provides detailed information on how to configure your CSE-200+.
Available System documentation
Next to the installation manual, a user guide, a safety guide, an API guide and a service manual are available
on Barco’s website, www.barco.com/clickshare.
A printed copy of the Safety Guide is included in the CSE-200+ box at purchase.
Depending on the CSE-200+ version, some graphics might be different to the ones used in this
manual. This however does not have any effect on the functionality.
1.2 Symbols and fonts
Symbol overview
The following icons are used in the manual :
Caution
Warning
Info, term definition. General info about the term
Note: gives extra information about the described subject
Tip: gives extra advice about the described subject
Font overview
• Buttons are indicated in bold, e.g. OK.
• Menu items are indicated in italic.
• Step related notes, tips, warnings or cautions are printed in italic.
• Procedure related notes, tips, warnings or cautions are printed in bold between 2 lines preceded by the
corresponding icon.
Introduction to the Installation Guide

Barco ClickShare CSE-200+ Specifications

General

Wireless Frequency Band	2.4 GHz and 5 GHz
Video Outputs	HDMI
Number of Sources Simultaneously on Screen	2
Native Protocols	AirPlay, Google Cast, Miracast
Wireless Sharing	Yes
Resolution	Up to 4K UHD (3840x2160)
Security	WPA2
Compatibility	Windows, macOS, iOS, Android
Operating System	Windows, macOS, iOS, Android
Frame Rate	30 fps
Output Resolution	Up to 4K UHD (3840x2160)
Audio	HDMI audio
USB	USB-A
ClickShare Buttons	2
Authentication Protocol	WPA2
Wireless Transmission Protocol	IEEE 802.11ac
Reach	30 meters
Maximum Number of Presenters	8
Connection Type	Wireless
Resolution Support	Up to 4K UHD (3840x2160)