Barco G62 Series - Powering off the Projector

77R5914654 /04 G62 series
5.2 Powering Off the Projector
How to power Off the projector
1. Press the POWER button (2) on the control panel or the OFF key (5) on the remote control, a message
displays on the screen.
INPUTEXIT
MENU
LENS
FOCUS ENTER
ON OFF
21 3
54 6
2 5
Image 5–4
2. Press the POWER button or OFF key again to confirm, otherwise the message disappears after 5
seconds and the projector remains on.
CAUTION: Don’t turn on the projector immediately after entering Standby mode.
Powering On/Off the projector