5. X8 rental peripherals and accessories
5.4 DX-700 digitizer
General
The DX-700 digitizer is a multi-window video processor designed for use as a versatile front-end to all Barco LED products. The
digitizer processes (image processing, conversion and conditioning) all source signals for digital distribution to every tile.
• Existing (legacy) LED products such as MiPIX, DLite, ILite and OLite are supported via the 32-bit DVI link on the system’s DVI
Output Module.
• Next generation LED products such as the X8 tiles are supported via the NNI interface on the system’s NNI Output Module.
Image processing and LED wall configuration and control functions are adjusted from Barco’s Director toolset, or via controls on the
DX-700 digitizer front panel itself. The Director toolset software is designed as a user interface to be used in conjunction with the
digitizer and display. It can be used on a PC that’s connected to the digitizer through an Ethernet connection.
Image 5-5
CAUTION: Refer to the manual(s) of the used digitizer for m ore information about installation and usage
guidelines.
R5905160 X8 RENTAL DISPLAY 25/02/2013 27
To Next Page
Loading...
