7. Basic setup procedures
7.1 Installing an adjustable foot
Necessary tools
• Allen wrench size 4 mm
• Hexagon socket size 10 mm
How to install an adjustable foot ?
1. Ensure there are no obstacles to smooth placement of the adjustable foot.
2. Slide an adjustable foot into the cross beam.
B
A
Image 7-1
A Attachment with foot beam.
B Height adjustment.
3. Attach the adjustable foot to the foot beam using an Allen wrench of 4 mm.
4. Slide an adjustable foot into the other end of the foot beam.
5. Attach this adjustable foot also to the foot beam using an Allen wren
ch of 4 mm
6. Adjust the height of the adjustable feet to level out the foot beam.
7. Place supporting blocks underneath the foot beam every 50 centimeters. This to prevent that the foot beam bends.
Caution: Never let the co mplete weight of the rental display rest on the adjustable foot.
40
R5905160 X8 RENTAL DISPLAY 25/02/2013
To Next Page
Loading...
