Barco X8 - Basic Setup Procedures

7. Basic setup procedures
7. BASIC SETUP PROCEDURES
About this chapter
This chapter contains all installation procedures necessary to handle the X8 rental tiles, to set up an X8 rental display and to remove
the X8 rental tiles from an X8 rental display. These procedures describe, with detailed step by step actions and illustrations, how to
install an X8 rental display in a floor mount or hanging configuration. Some of the procedures are redundant either for a floor mount
or for a hanging configuration. See chapter "Setup process of a X8 rental display", page 31, to follow the correct order of procedures
required to set up your X8 rental display in the configuration of your choice.
Overview
• Installing an adjustable foot
• Installing the X8 rental feet
• Installing the X8 rental tile upon the X8 rental foot
• Installing the X8 rental tile
• Installing the X8 stacker system
• Installing the X8 truss beam
R5905160 X8 RENTAL DISPLAY 25/02/2013
39