5. X8 rental peripherals and accessories
5.6 Cont rol software
General
The control software is designed as a graphic user interface (GUI) and can be used to control and configure the digitizer as well as
the Barco LED wall via a PC (e.g. Director toolset).
Minimum required software version: 2.07
Image 5-9
Control software “Director toolset”.
CAUTION: Refer to the manual(s) of the used control software for more information about installation and
usa ge guide li nes.
R5905160 X8 RENTAL DISPLAY 25/02/2013 29
To Next Page
Loading...
