Barco X8 - Cabling the X8 Display

8. Cabling of the X8 display
8. CABLING OF THE X8 DISPLAY
About this chapter
This chapter describes the power and data cabling from X8 Connection Box to X8 Connection Box and from X8 Connection Box to
the X8 modules.
WARNING: The input and output sockets of the X8 Connection Box can only be used in conjunction with
Barco’s outdoor cables for X8 LED-walls. Do not use any other cables than those specified .
WARNING: Dum my plugs m ust be placed o n un used inpu t and output so ckets of the X8 Con nection Box.
Overview
• Power cabling of the X8 display
• Data cabling of the X8 display
• Interconnection between X8 Connection Box and X8 Modules
R5905160 X8 RENTAL DISPLAY 25/02/2013
53