10. Servicing
10.3 Replacing the X8 Connection Box
How to replace theX8 Connection Box?
1. Read and heed the servicing safety instructions.
2. Disconnect the power and data linking cables from the X8 Connection Box.
3. Disconnect the module power and data cable strings from the X8 Connection Box.
4. Unlock the X8 Connection Box by loosen the two thumbscrews (reference 1 image 10-2) at the base of the X8 Connection Box
mounting plate as illustrated.
1
1
Image 10-2
5. Remove the X8 Connection Box by lifting it up a bit and hooking it out of the two mounting pins (reference 2 image 10-3) at the
top of the mounting plate.
2
Image 10-3
64 R5905160 X8 RENTAL DISPLAY 25/02/2013
To Next Page
Loading...
