10. Servicing
10.1 Safety instructions
Personal protection
WARNING: Ensure you u nderstand and follow all the safety guidelines, safety in structions, warnings and
cautions mentioned in this manual.
WARNING: Be aware of suspended loads.
WARNING: Wear a hard hat to reduce the risk of person al injury.
WARNING: Be careful w hile wo rking with heavy loads.
WARNING: Mind your fingers while working with heavy loads.
Safety precautions
• Fence off a restricted area of at least 3 meters around the LED-wall using an eye-catching fence and “KEEP OUT” signs. This
is to prevent unauthorized persons from coming near the LED-wall d
uring servicing.
• Inspect the complete LED-wall for security, wear, deformation, corrosion, and any other circumstances that may affect the load
handling capability of the part.
• Do not modify and/or replicate any component. Barco uses specific materials and manufacturing processes in order to achieve
part strength. No other parts than Barco parts are allowed.
• Both hands must be free for servicing X8 tiles in an LED-wall. Therefore the use of a ladder to access a tile is forbidden. Only
the use of a scaffold or a Z-lift is allowed.
62
R5905160 X8 RENTAL DISPLAY 25/02/2013
To Next Page
Loading...
