104
BARRETT PRC-4090 TACTICAL HF SDR TRANSCEIVER - ADVANCED OPERATION
Zeroise
Remote Access Password
Over the Air Zeroise (OTAZ)
Transceiver Lock
Zeroise will clear the following information from the local transceiver:
• all channel information
• all Options
• all ALE 2G and 3G information
• ALL security PINs apart from the Transceiver Lock/OTAZ PIN
• encryption keys
This allows a user to set a password used when accessing the transceiver
remotely via serial or network connections e.g. when using the Barrett Remote
Control App, the Desktop console or programming via PC.
OTAZ will clear the following information from a remote transceiver via a Selcall
and the entry of the Transceiver Lock/OTAZ PIN for that station:
• all channel information
• all Options
• all ALE 2G and 3G information
• ALL security PINs apart from the Transceiver Lock/OTAZ PIN
• encryption keys
The Transceiver Lock function locks a remote transceiver via Selcall and uses the
remote transceiver’s pre-set Transceiver Lock/OTAZ PIN. This function does not
remove any settings and can be reversed by entering the Transceiver Lock/OTAZ
PIN on the front panel of the transceiver.
Enable Power On PIN
Selecting this menu option allows a user to manually change whether the trans-
ceiver asks for a password upon start-up. This password is set using the Barrett
4000 Series Programming Software.
To Next Page
Loading...
