55
BARRETT PRC-4090 TACTICAL HF SDR TRANSCEIVER - SELCALL
Hangup Call
When a call to a telephone interconnect base station has completed or a secure
call link is complete, the operator should ‘hang-up’ by sending a hang-up call.
1. Press
2. Select Hangup and the Hangup call will be
sent out. The transceiver will use the des-
tination ID when sending the call from the
initiating transceiver or the source ID when
sending from the receiving transceivers. Lis-
ten for hang-up revertive tone which con-
rms the disconnect was successful.
Sending a Hangup Call
To Next Page
Loading...
