53
BARRETT PRC-4090 TACTICAL HF SDR TRANSCEIVER - SELCALL
If a reply is not received, either repeat the process or
change the channel and repeat.
Secure Call
The Secure Call option provides the transceiver operator with a secure speech
path using an in-band hopping technique. Secure Call is simple to use requiring
each radio to be setup with the same four digit “Selcall Secure Call Code”.
Features:
• The Secure Call is limited to point to point and point to multi point (group
call) communications between radios within a network.
• If any radio drops out of the secure call, it is not possible to re-enter the secure
call. Operators can re-establish the link following the Secure Call method.
Secure Call Codes
A Secure call code is necessary to
make a successful secure call. Create
a Secure Call Code via Settings, Secu-
rity, Secure Call Code. Type a 4 digit
number.
Note: The 4 digit secure call code must
be the same for both the transmitting
and receiving stations.
Settings Security
To Next Page
Loading...
