iii
Compliance
Barrett 4000 series transceivers have been designed to comply to the following
communications standards:
• Australian / New Zealand Standard
• MF and HF Radio Communications.
Equipment in the land mobile service utilising single sideband suppressed car-
rier emission:
• AS/NZS 4770:2000
• FCC Part 90.
• FCC Part 87
• Industry Canada (IC) RSS-125 Issue 2
Barrett 4000 series transceivers comply to the following EMC standard:
• EN301 489-1 V 1.4.1 (2002-08).
Barrett 4000 series transceivers comply to the following electrical safety stand-
ard:
• EN60950-1:2002.
FCC RF Exposure Compliance Statement
The Barrett 4000 Series transceivers have been evaluated and comply with the
Federal Communications Commission (FCC) RF exposure limits for the General
Population/Uncontrolled exposure environment.
In addition, the transceivers have been designed to comply with the following
standards and guidelines:
• FCC 96-326, Guidelines for Evaluating the Environmental Effects of
Radio-Frequency Radiation
• FCC OET Bulletin 65 Edition 01-01 (2001) Supplement C, Evaluating Com-
pliance with FCC
• Guidelines for Human Exposure to Radio Frequency Electromagnetic Fields
• ANSI/IEEE C95.1-1992, IEEE Standard for Safety Levels with Respect to
Human Exposure to Radio Frequency Electromagnetic Fields, 3 kHz to 300
GHz
• ANSI/IEEE C95.3-1992, IEEE Recommended Practice for the Measurement
of Potentially Hazardous Electromagnetic Fields - RF and Microwave.
To Next Page
Loading...
