42
BARRETT PRC-4090 TACTICAL HF SDR TRANSCEIVER - SELCALL
The audible alarm will sound for 60 seconds, unless acknowledged and then
time out. To cancel the alarm and acknowledge the call, press the PTT button or
tap either
or (described above). When the audible alarm times out,
the call received
icon displays and a periodic audio reminder is emitted.
For details of previously received Telcalls, press and hold to display the
Advanced Call History screen.
Receiving a Telcall
Note: To receive a Telcall your transceiver must be programmed with a Self ID and
where multiple channels are in use the scan function should be activated.
When you receive a Telcall, your station
sends a revertive call (to alert the calling
station that its call was received), an audi-
ble alarm sounds, the mute (squelch) (if
selected) opens and the Telcall screen dis-
plays.
The Telcall screen shows the Selcall ID and
telephone number of the caller.
Tap
to stop the audible alarm but
maintain the Telcall screen.
Tap
To close the Telcall screen.
To Next Page
Loading...
