4-14
920512-768 Operator Manual Operating Instructions
4.8 Abort a Cycle If cycle needs to be aborted for any reason, proceed as follows:
Press STOP on touch screen. Display shows:
RESUME OR ABORT CYCLE?
Press ABORT CYCLE on touch screen.
WARNING – BURN HAZARD:
After pressing STOP touch
pad, wait until water flow
stops before opening doors.
Hot water/steam may be
sprayed through door open-
ing if doors are opened too
soon.
Figure 4-7. Resume or Abort a Cycle
Press STOP
Touch Pad
Press to ABORT
Cycle
Press to RESUME
Cycle
To Next Page
Loading...