5-9
Cycle and Control Value Programming Operator Manual 920512-768
• Re-Use Water/Pure Water touch pad – to establish if water
from final rinse or pure water treatment should be re-used for
next pre-wash treatment.
NOTE: If pure water is re-used for Pre-Wash treatment of
next cycle, then final rinse water re-use option is automati-
cally set to "NO".
6. Once cycle modifications finished, press OK button, display
returns to Choose a Cycle screen.
Press X touch pad until screen returns to Mode Selection screen.
or
Repeat procedure for next cycle to be modified.
To Next Page
Loading...