Basler A202k - Horizontal Binning; Vertical Binning

Configuring the Camera
4-18 BASLER A202k
DRAFT
4.2.4.14 Horizontal Binning
4.2.4.15 Vertical Binning
Purpose: To enable or disable horizontal binning. See Section 3.8 for an explanation of binning.
Type: This is a read or write command.
Read Command: Cmd-ID R/W-Flag Data Length Data
0xA3 1 1 -
Response: Cmd-ID R/W-Flag Data Length Data
0xA3 0 1 1 Byte
Write Command: Cmd-ID R/W-Flag Data Length Data
0xA3 0 1 1 Byte
Response: None
Data Format: Byte 1 An ID that specifies the binning status (see the table below).
ID Binning
0x00 Horizontal binning not enabled
0x01 Horizontal binning enabled
Purpose: To enable or disable vertical binning. See Section 3.8 for an explanation of binning.
Type: This is a read or write command.
Read Command: Cmd-ID R/W-Flag Data Length Data
0xA4 1 1 -
Response: Cmd-ID R/W-Flag Data Length Data
0xA4 0 1 1 Byte
Write Command: Cmd-ID R/W-Flag Data Length Data
0xA4 0 1 1 Byte
Response: None
Data Format: Byte 1 An ID that specifies the binning status (see the table below).
ID Binning
0x00 Vertical binning not enabled
0x01 Vertical binning enabled

For full binning, enable both horizontal and vertical binning.