Basler A202k - Read FPGA Firmware Version; Read Microcontroller Firmware Version

Configuring the Camera
4-22 BASLER A202k
DRAFT
4.2.5.7 Read Microcontroller Firmware Version
4.2.5.8 Read FPGA Firmware Version
Purpose: To read the microcontroller firmware version.
Type: This is a read only command.
Read Command: Cmd-ID R/W-Flag Data Length Data
0x40 1 3 -
Response: Cmd-ID R/W-Flag Data Length Data
0x40 0 3 3 Bytes
Data Format: Byte 1 Low byte of firmware version BCD coded
Byte 2 High byte of firmware version BCD coded
Byte 3 Register Layout ID
Purpose: To read the FPGA firmware version.
Type: This is a read only command.
Read Command: Cmd-ID R/W-Flag Data Length Data
0x41 1 3 -
Response: Cmd-ID R/W-Flag Data Length Data
0x41 0 3 3 Bytes
Data Format: Byte 1 Low byte of firmware version BCD coded
Byte 2 High byte of firmware version BCD coded
Byte 3 Register Layout ID