Basler A202k - 1.3 Environmental Requirements

Introduction
BASLER A202k 1-3
DRAFT
Figure 1-1: A202k Spectral Response
1.3 Environmental Requirements
1.3.1 Temperature and Humidity
Housing temperature during operation: 0° C ... + 50° C (+ 32° F ... + 122° F)
Humidity during operation: 20% ... 80%, relative, non-condensing
1.3.2 Ventilation
Allow sufficient air circulation around the camera to prevent internal heat build-up in your system
and to keep the camera housing temperature during operation below 50° C. Provide additional
cooling such as fans or heat sinks if necessary.
Warning!
Without sufficient cooling, the camera can get hot enough during opera-
tion to cause burning when touched.
300 400 500 600 700 800 900 1000
0.00
0.05
0.10
0.15
0.20
0.25
0.30
0.35
0.40
0.45
0.50
Wavelength (nm)