Basler A202k - 3.12 Camera Status

Operation and Features
BASLER A202k 3-33
DRAFT
3.12 Camera Status
The A202k monitors its status by performing a regular series of self checks. The current status of
the camera can be viewed in several ways:
• with the Camera Configuration Tool. You can use the Status Tab (see Section 4.1 and the
configuration tool’s on-line help) to check a list of several possible errors and an indication of
whether those errors are present.
• with binary commands. You can use the Camera Status command (see Section 4.2.7) to
check if the camera has detected any errors.
• by checking the LED on the back of the camera. If certain error conditions are present, the
LED will blink (see Section 6.1).