Revision History AW00061111000
66 Installation and Setup Guide for ace CL, aviator, beat, pilot, racer, runner, and scout Cameras (Windows)
AW00061108000 17 Dec 2014 General
Minor corrections and modifications throughout the manual.
Updated email addresses for technical support.
Updated Basler contact address for Asia.
Added export compliance information.
Updated pylon 4-related language conventions.
Removed Microsoft Windows XP and Vista as supported
operating systems.
Added Microsoft Windows 8 and 8.1 as supported operating
systems.
Updated instructions related to specific operating systems.
Updated screenshots of the pylon software.
Added information related to the installation of racer GigE and
Camera Link cameras.
Added information related to the installation of USB 3.0 cameras.
Moved sections "Modifying Your Software Installation" from the
interface-specific sections to Section 9.1 on page 93.
Chapter 1
Removed Section 1.1.1 ("LWIP TCP/IP Licensing").
Chapter 2
Moved precautions from Sections 2.1 and 2.2 to the camera
interface-specific sections (see Section 5.4.1 on page 25, Section
6.4.1 on page 60, Section 7.2.1 on page 70, and Section 8.3.1 on
page 80).
Chapter 3
Updated operating system requirements in Section 3.1 on page
6.
Updated information about installing the .NET Framework 2.0 in
Section 3.3 on page 7.
Removed the Basler pylon VB6 Runtime and the pylon SDK for
VB6 from the software features list and the recommended
combinations table in Section 3.3 on page 7. These features are
no longer included in the pylon software.
Chapter 5
Added the CS-mount to Chapter 5 on page 13.
Added information in Section 5.4.3 on page 30 about multiple
camera description files and related periods until the camera
features become available after camera power on.
Updated drawings of the GigE camera connections and moved
them to a separate section (see Section 5.4.2 on page 29).
Updated the list of recommended network adapters in Section
5.5.1 on page 32..
Document
Number
Date Changes