Basler GigE VISION CAMERAS User Manual

AW00118303000 Standard Features
Basler racer GigE 173
Setting Your System for Event Reporting
Event reporting must be enabled in the camera and some additional software-related settings must
be made. This is described in the "Camera Events" code sample included with the pylon software
development kit.
Event reporting must be specifically set up for each type of event using the parameter name of the
event and of the supplementary information. The following table lists the relevant parameter names:
You can enable event reporting and make the additional settings from within your application
software by using the pylon API. The pylon software development kit includes a "Camera Events"
code sample that illustrates the entire process.
For more detailed information about using the pylon API, refer to the Basler pylon Programmer’s
Guide and API Reference.
Event Event Parameter Name Supplementary Information
Parameter Name
Acquisition Start
Overtrigger
AcquisitionStartOvertriggerEventData AcquisitionStartOvertriggerEventStreamChannelIndex
AcquisitionStartOvertriggerEventTimestamp
Frame Start
Overtrigger
FrameStartOvertriggerEventData FrameStartOvertriggerEventStreamChannelIndex
FrameStartOvertriggerEventTimestamp
Line Start
Overtrigger
LineStartOvertriggerEventData LineStartOvertriggerEventChannelIndex
LineStartOvertriggerEventTimestamp
Frame Timeout FrameTimeoutEventData FrameTimeoutEventStreamChannelIndex
FrameTimeoutEventTimestamp
Event Overrun EventOverrunEventData EventOverrunEventStreamChannelIndex
EventOverrunEventTimestamp
Table 12: Parameter Names of Events and Supplementary Information

Basler GigE VISION CAMERAS Specifications

General

Brand	Basler
Model	GigE VISION CAMERAS
Category	Digital Camera
Language	English