Safety
A: PL120100.020
B: PL120100.020
E: 03.93 / T. Weiß
G: 06.93 / T. Weiß
Chapter: 2
Page: 8
In order to prevent the occurrence of accidents when the
protecing guard is opened, all movements are blocked both
hydraulically and electrically (including closing, opening,
ejection, nozzle, metering, decompression and injection
movements).
2.8 Safety device for handling unit (optional)
In accordance with the provisions for accident prevention,
the handling unit must be equipped with a suitable
protective device preventing interference with the system,
in order to protect the operating personnel.
"We decline any responsibility in case of non-
compliance with the safety requirements!"
For this purpose, we have designed suitable safety
devices which - if included in the order package - are
installed on your handling unit. If the handling unit was
delivered without any safety device, upon the customer’s
request, it is the sole responsibility of the customer and the
user to employ adequate safety measures.
2.9 Safety device supervision
The safety devices of this machine can only serve their
purpose properly if their correct functioning is safeguarded.
For this reason, their efficiency must be continuously checked.
1. Check electrical access protection
Stable setting of position switches required.
2. Check hydraulic access protection
Stable setting of mechanically actuated distributing valve
required.
3. Check mechanical access protection
Smooth movement of bumper bar on nozzle platen required.
If a machine error has occurred, thereby triggering the
mechanical access protection, contact Battenfeld Customer
Services or the competent representative office.
WARNING!
To Next Page
Loading...