Structure and Function
A: PL120101.053
B: PL120100.053
E: 03.93 / T. Weiß
G: 06.93 / T. Weiß
Chapter: 5.3
Page: 1
?
12 3
4
5
6
7
8
Bild: PL-0009.TIF
5.3 Injection unit
5.3.1 Technical description
The injection unit consists of a plastification unit (Item 1), a
holding device for the platification unit (Item 2), a fastening
nut for the screw cylinder (Item 3), a metering drive unit
including a hydraulic motor (Item 4), a cylinder block (Item 5)
with an integrated nozzle drive cylinder (Item 6), an injection
cylinder (Item 7) and the guiding roller (Item 8).
To Next Page
Loading...