General
A: PL120100.010
B: PL120100.010
E: 03.93 / T. Weiß
G: 06.93 / T. Weiß
Chapter: 1
Page: 2
Safety
ATTENTION!
Voltage
1.2 Area of application
The injection moulding machines of the PLUS series were
conceived for the processing of thermoplastics, thermosets
and elastomers as well as for LIM.
Applications going beyond this definition do not conform to
the original intended use of the machine. The manufacturer
accepts no liability for defects arising from this type of misuse
- the risk is borne solely by the operator.
1.3 Explanation of symbols
The safety symbol is featured in all instructions for work
safety contained in the present manual that refer to possible
hazards to human life and health. Please observe these
instructions and proceed with the utmost caution.
Communicate all instructions for work safety to other users
as well. Apart from the instructions contained in this user
manual, it is also necessary to observe the general instructions
for safety and prevention of accidents.
This Attention! sign appears wherever it is especially
important to comply with guidelines, instructions and
indications, and to observe the correct operation of routines
and machine cycles as precisely as possible, and wherever
it is vital to avoid any damage to, or destruction of, the
machine and/or other elements of the installation.
The voltage symbol concerns all passages in the manual
which refer to the staff coming into contact with electrical
installations and equipment. Please always observe the
local regulations in force with respect to the safety of electrical
installations.
The symbol for environmental hazards refers, inter alia, to
the environmental hazards posed by the disposal of various
materials. When carrying out repair and maintenance work,
please take care that such wastes are properly disposed of.
Environmental
hazards
To Next Page
Loading...