Baumuller b maXX 1000 - Page 147

Parameter
Parameter manual b maXX
®
1000
Document no. 5.07004.03
147
of 208
4
P2112
This parameter displays the output power in kW of the terminals U/T1, V/T2, W/T3 to the
motor.
P2113
This parameter displays the estimated value of torque in Nm as it relates to the current.
P2114
The frequency command value is displayed here.
P2115
The actual value of frequency is displayed here.
P2116
This parameter displays the temperature of the IGBT in °C.
P2117
This parameter displays the output current in A supplied to the motor.
P2112
Ausgangsleistung 0.00 to 99.99 kW
- Output power 0.00 kW
A BM_u_OutputPower 100:1 -
P2113
Ausgangsmoment 0.00 to 655.35 Nm
- Output torque 0.00 Nm
A BM_u_OutputTorque 100:1 -
P2114
Frequenzsollwert 0.00 to 600.00 Hz
- Set point frequency 0.00 Hz
A BM_u_SetPointFrequency 100:1 -
P2115
Frequenzistwert 0.00 to 600.00 Hz
- Actual output frequency 0.00 Hz
A BM_u_ActualFrequency 100:1 -
P2116
IGBT Temperatur 0.0 to 999.9 °C
- IGBT temperature 0.0 °C
A BM_u_IGBTTemperature 10:1 -
P2117
Ausgangsstrom 0.0 to 99.9 A
- Output current 0.0 A
A BM_u_OutputCurrent 10:1 A -