Baumuller b maXX 1000 - Page 42

Parameter description
Parameter manual b maXX
®
1000
Document no. 5.07004.03 Baumüller Nürnberg GmbH
42
of 208
4.3
P0304
This parameter displays the active drive operation mode.
P0305
This parameter shows the current status of the drive.
P0304
Ist-Betriebsart 0 to 249
- Operation mode actual 249
A BM_i_OperationModeAct 1:1 -
Value Meaning
249 Motor parameters auto-tuning
2 Speed setting 1 (ramp function generator)
5 Jog operation
6 Operation mode (function for motion control)
P0305
Antriebs-Status 0 to 15
- Drive status 0
A BM_u_DriveStatus 1:1 -
Value Meaning
0 Not ready-to-start
1 Inhibit start
2 Ready to switch on
3 Switched on
4 Operation enabled
7 Quickstop active
14 Error reaction active
15 Error