Baumuller b maXX 1000 - Page 52

Parameter description
Parameter manual b maXX
®
1000
Document no. 5.07004.03 Baumüller Nürnberg GmbH
52
of 208
4.3
P0810
This parameter sets a combination of first and second master frequency command.
P0811
This parameter can be used to set frequency command by power on or read keypad fre-
quency command.
P0812
This parameter can be used to set frequency command or read communication frequency
command.
P0813
This parameter is used to save keypad or RS485 frequency command.
P0810
Kombination von erster und zweiter Hauptfrequenz-
vorgabe
0 to 2
EE Combination of first and second master fre-
quency command
0
ON BM_u_CombFirstSecondMasterFrequComm 1:1 -
Value Meaning
0 First master frequency command ZP0801– only
1 First master frequency ZP0801–+ second master frequency ZP0809–
2 First master frequency ZP0801–- second master frequency ZP0809–
P0811
Keypad Frequenzvorgabe 0.00 to 600.00 Hz
EE Keypad frequency command 50.00 Hz (ZP0310– = 9) or
60.00 Hz (ZP0310– = 10)
ON BM_u_KeypadFrequComm 100:1 Hz -
P0812
Kommunikation Frequenzvorgabe 0.00 to 600.00 Hz
EE Communication frequency command 50.00 Hz (ZP0310– = 9) or
60.00 Hz (ZP0310– = 10)
ON BM_u_RS485FrequComm 100:1 -
P0813
Auswahl zur Speicherung von Keypad- oder Kom-
munikationsfrequenz
1 to 2
EE Selections for saving keypad or communication
frequency
0
STOP BM_u_SelectSaveFrequency 1:1 -
Value Meaning
0 Save keypad Up/Down and ProDrive communication initial frequency
1 Save keypad Up/Down frequency only
2 Save ProDrive communication frequency only