Baumuller b maXX 5000 Application Handbook

53
of 76
Application handbook Servo pump function V1 for BM5000
Document No.: 5.17002.02
6PARAMETERS
In this chapter we describe the parameters which are available, sorted by numbers.
WARNING!
Danger from modification of the parameter settings!
The danger is: mechanical and electrical danger
m The change of parameters affects the behavior of the Baumüller-unit and conse-
quently the behavior of the construction and its components. If you change the ad-
justments of the parameters, you may cause a dangerous behavior of the
construction and/or of its components.
m After each modification of the parameter settings, a commissioning with consider-
ation to all safety instructions and safety regulations must be executed.
NOTE
Parameters, which are perhaps signaled by the drive, but are not specified, are not
supported. The use of this parameter can lead to undefined behavior of the drive.

Baumuller b maXX 5000 Specifications

General

Brand	Baumuller
Model	b maXX 5000
Category	Servo Drives
Language	English