Baumuller b maXX BM4 Series Instruction

Specification of encoder modules
Instruction Handbook b maXX (BM4-F-)ENC-XX (Encoder module)
Document No.: 5.01042.12 Baumüller Nürnberg GmbH
24
of 102
3.4
BM4-F-ENC-05 for sine cosine encoders with EnDat
®
2.1
The encoder module provides a bidirectional, synchronous-serial EnDat
®
interface, posi-
tion data and parameter can be exchanged between controller and encoder with a maxi-
mum data transmission rate of 2 MBit/s.
BM4-F-ENC-06 for encoders with EnDat
®
2.2
he encoder module provides a bidirectional, synchronous-serial EnDat
®
interface, posi-
tion data and parameter can be exchanged between controller and encoder with a maxi-
mum data transmission rate of 8 MBit/s.
.
BM4-F-ENC-07 for sine cosine encoders with SSI interface without encoder supply
The encoder module provides a synchronous-serial SSI interface, position data and pa-
rameter can be exchanged between controller and encoder with a maximum data trans-
mission rate of 2 MBit/s.
BM4-F-ENC-17 for sine cosine encoders with SSI interface and 5V encoder supply
The encoder module provides a synchronous-serial SSI interface, position data and pa-
rameter can be exchanged between controller and encoder with a maximum data trans-
mission rate of 2 MBit/s.
Power supply 8 V
DC
, stabilized to + 5 V at the encoder
Signal level ~1 V
SS
Permitted current input of
encoder
max. 250 mA
Power supply 8 V
DC
, stabilized to + 5 V at the encoder
Permitted current input of
encoder
max. 250 mA
Power supply external encoder supply
Signal level ~1 V
SS
Power supply 8 V
DC
, stabilized to + 5 V at the encoder
Signal level ~1 V
SS
Permitted current input of
encoder
max. 250 mA

Baumuller b maXX BM4 Series Specifications

General

Brand	Baumuller
Model	b maXX BM4 Series
Category	DC Drives
Language	English