Baumuller b maXX BM4 Series Instruction

39
of 102
Instruction Handbook b maXX (BM4-F-)ENC-XX (Encoder module)
Document No.: 5.01042.12
5TRANSPORT AND PACKAGING
5.1 What to observe when transporting
For initial transport the BM4-F-ENC-XX for standard controller is packed at the manufac-
turer. If the device is to be further transported, ensure that the following conditions are
met throughout the entire transport:
m Climate class 2 K 3 as per EN 60721-3-2
m Temperature range - 30 °C up to + 70 °C
m Vibration, shock, continuous shock class 2 M 1 as in EN 60721-3-2
5.2 Transport inspection
Upon receiving the delivered goods, immediately examine them for completeness and
transport damage.
If there is outwardly visible transport damage, proceed as follows:
m Do not accept the delivery or conditionally accept it with reservations.
m Note the extent of the damage on the transport documents or on the delivery note of
the transport agent.
m Immediately file a complaint with the freight carrier. Have the complaint confirmed in
writing and immediately contact the responsible representative of Baumüller Nürnberg
GmbH.
NOTE!
The device may not be operated if there is visible transport damage!

Baumuller b maXX BM4 Series Specifications

General

Brand	Baumuller
Model	b maXX BM4 Series
Category	DC Drives
Language	English