93
of 102
Instruction Handbook b maXX (BM4-F-)ENC-XX (Encoder module)
Document No.: 5.01042.12
12DISPOSAL
12.1 Safety notes
NOTE!
Baumüller products are not subject to the scope of application of the EU's Waste
Electrical and Electronic Equipment Directive (WEEE, 2002/96/EC). Hence,
Baumüller is not obligated to bear any costs for taking back and disposing of old de
-
vices.
DANGER!
Risk of fatal injury from electrical current!
Stored electric charge.
Discharge time of the system = discharge time of the device with the longest DC link
discharge time in the DC link connection.
Refer to Instruction handbook b maXX BM4000, Electrical data.
Therefore:
m Do not touch before taking into account the discharge time of the capacitors and
electrically live parts.
m Heed corresponding notes on the equipment.
m If additional capacitors are connected to the DC link, the DC link discharge can
take a much longer time. In this case, the necessary waiting period must be deter
-
mined or a measurement made as to whether the equipment is de-energized. This
discharge time must be posted, together with an IEC 60417-5036 (2002-10) warn
-
ing symbol, on a clearly visible location of the control cabinet.
To Next Page
Loading...
