RPC SERIES OWNER’S MANUAL
RPC SERIES QUICK START (RPC-3, RPC-3A, AND RPC-5)
________________________________________________________________________________
11
Access Default password is <cr>; disabled.
NOTE :
If user name and password are disabled (default), outlet
users will have access to all admin functions.
Outlets
Outlet Status display –
Default is enabled
Command Confirmation –
Default is
enabled
Outlet Power-up Delay – programmable
elapse time before applying power to an
outlet after unit power-up, reset, or reboot.
Default is 0.
Name Outlets –
Default name is Outlet 1,
Outlet 2, …
Display Outlet Users – A display of outlet
user assignments.
Default is no users
assigned.
UNIT STATUS
The RPC sends a Unit Status Menu that
provides vital information about the RPC;
system status, network interface, logged user
status, and outlet status. Select the number
to review the status.
RESET UNIT
RESET UNIT allows changes to take effect.
It will not set the unit to factory default. It
will not disrupt power to the outlets
currently energized.
LOGOUT
Ends the session.
To Next Page
Loading...
Need help?
General