BBH SMX Series - Installation I;O-Extension; Physical Address Configuration of the Slave Modules (Central;Decentral)

Installation manual
HB-37420-810-01-25F-EN SMX100 Installation manual.docx Page 130 of 260
Version: 25F
5.5.2 Installation I/O-extension
Note:
Max. 8 SMX 1xx modules can be operated with one basic unit.
5.5.2.1 Physical address configuration of the slave modules (central/decentral)
On the SMX1xx module the bus address must be set with the help of the address switch.
This setting is made on the back of the module
Note:
• Address range of the SMX1xx module from 1...15.
• Address "0" is reserved for the basic device.