BBH SMX Series - Decentralised Expansion Module SMX132-0(R);2;D; 132-1(R);2;D

Installation manual
HB-37420-810-01-25F-EN SMX100 Installation manual.docx Page 59 of 260
Version: 25F
3.2.3.5 Decentralised expansion module SMX132-0(R)/2/D / 132-1(R)/2/D
Type designation
Device design
Design of module with the following periphery:
14 Digital inputs
0/10 Digital I/Os
2 Pulse outputs
2/6 Relay outputs
2/4 pn- or pp- switching outputs
2/4 Auxiliary outputs
1 7-segment display
1 status-LED
14 status LEDs for inputs
2 status-LEDs for relay outputs
10 status-LEDs für I/O‘s
4 status-LEDs for outputs
1 Optional: Communication interface (/D)
Characteristics of the module:
• Can be used decentralised and central axis expansion
o Decentralised: Communication with base module SMX100-x via communication
interface (/D)
o Central: Communication with base module SMX100-x via backplane bus
• Logic diagram oriented programming
• External contact monitoring of connected switchgear (EMU)
• Comprehensive diagnostics functions integrated
• Assembly on top hat rail
• SMX132-1/2/D: 10 safe I/O - can be configured as inputs or outputs
• The mechanical structure of SMX132-1/D differs from the figure.
(See mechanical data)