Designs of the module with following peripherals:
1 SMX51 CAN 2.0
or
SMX52 PROFIBUS
or
SMX53 PROFINET
or
SMX54 CANopen
or
SMX55 EtherCAT
or
SMX57 DeviceNet
1 backplane bus interface
1 status LED for operating status
1 status LED CAN-communication
Characteristics of the module:
• Communication modules CAN or PROFIBUS or PROFINET or CANopen or EtherCAT
or DeviceNet
• 2 x 8 Byte process output image PAA with free allocation
• 32 Bit process output image PAE
• You can take detailed information from the installation manuals of the respective field
bus modules.
This must be specified when ordering a base module!!