BBH SMX Series - Connection of a Resolver as Master

Installation manual
HB-37420-810-01-25F-EN SMX100 Installation manual.docx Page 198 of 260
Version: 25F
5.11.3.5 Connection of a resolver as master
Sub-D-
Stecker
(9 polig)
SMX
Resolver
(Master-Betrieb)
Reference Out +
COS -
SIN +
SIN -
COS +
Monitor Reference Voltage
Pin 1
Pin 2
Pin 3
Pin 4
Pin 5
Pin 6
Pin 7
Pin 8
Pin 9
Reference Out -
Reference In +
Reference In -
With this type of connection the clock signals are submitted from the SMX100 module to the
absolute encoder and the data from the encoder to the SMX100.
GND of the supply voltage
24 V DC
GND of the supply voltage
24 V DC
Sub-D plug
(9 pin) SMX
Resolver
(Master mode)