BBH SMX Series - Connecting an Incremental Encoder with TTL-Signal Level

Installation manual
HB-37420-810-01-25F-EN SMX100 Installation manual.docx Page 196 of 260
Version: 25F
5.11.3.3 Connecting an incremental encoder with TTL-signal level
Pins 1, 3 and 7 stay open and are reserved for later expansions.
Sub-D-
Stecker
(9 polig)
SMX
Inkremental
Encoder
n.c.
Ground
n.c.
B-
A+
A-
n.c.
B+
Pin 1
Pin 2
Pin 3
Pin 4
Pin 5
Pin 6
Pin 7
Pin 8
Pin 9
Versorgungsspannung
Sub-D plug
(9 pin) SMX
Incremental
encoder
Supply voltage