BBH SMX Series - Connection of a Resolver as Slave

Installation manual
HB-37420-810-01-25F-EN SMX100 Installation manual.docx Page 199 of 260
Version: 25F
5.11.3.6 Connection of a resolver as slave
Sub-D-
Stecker
(9 polig)
SMX
Absolut-
Encoder
(Slave-Betrieb)
n.c.
Ground
n.c.
CLK-
DATA+
DATA-
n.c.
CLK+
Pin 1
Pin 2
Pin 3
Pin 4
Pin 5
Pin 6
Pin 7
Pin 8
Pin 9
externes Abtastsystem
Versorgungsspannung
With this type of connection both clock signals and data are read in. In this example the module
does not supply the encoder with voltage.
GND of the supply voltage
24 V DC
Sub-D plug
(9 pin)
SMX
Absolute
Resolver
(Slave mode)
Supply voltage
external sensing system