HB-37420-810-01-25F-EN SMX100 Installation manual.docx Page 8 of 260
Version: 25F
1 Important notes
Definition of individual target groups
Project engineers for safe drive systems:
Engineers and technicians
Assembly, electric installation, maintenance and replacement of devices:
Maintenance electricians and service technicians
Commissioning, operation and configuration:
Technicians and engineers
1.1 Definitions
The designation SMX100 is used as generic term for all derivatives from the SMX100 product
range. Wherever this description refers to a certain derivative, the complete designation is
used.
The term "safe" used in the following text in any case refers to the classification as a safe
function for application up to Pl e acc. to EN ISO 13849-1 or SIL3 acc. to EN 61508.
The system software "SafePLC", “Safe PLC2” serves the purpose of configuring and
programming SMX100 modules.
The modules of the SMX100 series are internally built up of two independent processing units.
In the following these are referred to as system A and system B.
To Next Page
Loading...
Need help?
General
