BBH SMX Series - Page 46

Installation manual
HB-37420-810-01-25F-EN SMX100 Installation manual.docx Page 46 of 260
Version: 25F
EMC
EN 61000-6-2, EN 61000-6-4, EN 61000-6-7,
EN 61800-3, EN 61326-3, EN 62061
Operating altitude
2000m
Overvoltage category
III
Degree of pollution
2
Mechanical data
Dimensions (HxDxW [mm])
SMX111 = 100x115x45
SMX111/2/D = 100x115x67,5
Weight (g)
SMX111 = 310
SMX111/2/D = 410
Mounting
To snap on top-hat rail
Number of T-bus connectors
SMX111
2
SMX111/2/D
3
Min. termianl cross-section / AWG
0,2 mm² / 24
Max. terminal cross-section / AWG
2,5 mm² / 12
(*) Maximal 2 Encoder / Axis
(**) pn/pp are configurable via SafePLC2
(***) Derating, see Chapter "Derating outputs"
1)
Value applies only for extension module. For a total assessment in accordance with EN ISO
13849-1 one must use a sries connection with the corresponding basic device
=> PFH
Logic
= PFH
Basic
+ PFH
Extension