Chapter 2: BD FACS Loader Option 35
Carousel
The carousel accommodates up to forty 12 x 75-mm tubes. Each carousel has a
unique ID printed on top and on an optically read label inside.
Figure 2-1 Sample-Prep Ready carousel
The Loader is compatible with both the green-tinted carousels labeled “Sample-
Prep Ready” and the traditional gray Loader carousels (Figure 2-2).
Figure 2-2 Compatible carousels
drawer holds the carousel; slides out for easy access
center spindle the axis around which the carousel spins; insert
the carousel onto the Loader here
drive system the motor that rotates the carousel (not visible
from exterior)
Table 2-1 Loader components (continued)
alignment hole
spindle hole
Sample-Prep Ready carousel traditional gray carousel
To Next Page
Loading...
