Becker MAP PILOT - Starting the Content Manager

16
GENERAL OPERATION >>>
> USE
> FR
> ES
> Follow the instructions of the software.
The Content Manager Becker® MAP
PILOT can be started immediately after
installation.
This completes the installation procedure.
Starting the Content Manager
> Connect the USB interface of the
Becker® MAP PILOT directly to the
USB port of the computer using the
USB cable provided.
After a short time, the Becker® MAP
PILOT is displayed as a removable storage
medium on the computer.
> Click on
Start > All Programs on the
computer.
> Select
Content Manager.
> Click on
Content Manager.
The Content Manager Becker® MAP
PILOT is started.
Note:
If the installation does not start automat-
ically, start in the folder “Content Man-
ager” on the removable storage medium
the file “Setup.exe”.