Becker MAP PILOT - Blocking Roads and GPS Info

42
NAVIGATION MODE >>>
> USE
> FR
> ES
Block ahead
You can block a stretch of road ahead or
an area. This determines a certain stretch
of road or an area that should not be used.
The Becker® MAP PILOT then attempts
to calculate a diversion.
> In the My Route menu, select
Block
road
.
> You can now select between
Block road
ahead
, Block area and Clear block-
ings
.
Block road ahead
> In the My Route menu, select
Block
road
.
> Select
Block road ahead.
> Select to select the desired length of
the block.
> Select to select the start of the block.
> Select to activate the block.
The blocking is activated and the system
performs a route recalculation.
Block an area
> In the My Route menu, select
Block
road
.
> Select
Block area.
The map appears with a rectangle that
shows area to be blocked.
> Search for the desired blocking area.
> Press the rotary control/push button.
> Select
Yes to block this area.
The blocking is activated and the system
should not use this area for future route
calculations.
Note:
The selected length of the block is only
an approximation since the actual dis-
tance blocked depends on the availability
of an exit.
Note:
You can block up to 10 areas.
1
2
3
1
2
3
Note:
Turn the rotary control/push button to
change the scale of the map display.
Push the rotary control/push button to
move the displayed rectangle to the de-
sired position.